CliniCare 20 is a mattress made of one layer of cold polyurethane foam, which is whole covered with a layer of thermoelastic foam. This composition of the core, combined with profiling, ensures better distribution of pressure created beneath the patient during positioning of the bed.
Seven-zone thermoelastic foam: For maximum patient comfort, the thermoelastic foam supports the patient’s entire body and forms the entire upper layer of the mattress. This layer is divided into seven zones, each of which is specifically shaped. Thanks to this design, the mattress ensures the prevention of up to fourth degree pressure ulcers.
Reinforced edges of the foam core: The edges of the mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.Transport handles: The transport handles on the side of the mattress cover can be used for better handling and easier relocation of the mattress.
The transport handles on the side of the cover can be used for better handling and easier relocation of the mattress.
PUR core with sides made of stiffer foam. Edges of the mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.
The viscoelastic foam ensures the mattress fully adapts to the patient’s body.
86 cm or 90 cm
|Weight of the mattress||16.5 kg|
Three-layer core made of PUR and VISCO foam
Non-flammable (CRIB 5)
46, 50 and 85 kg/m3
Welded composite cover (PU + PVC), covered zip
Non-flammable (CRIB 7)
|Patient weight limit||230 kg|
With correct positioning of the patient, the mattress is suitable for patients with up to a fourth degree risk of the incidence of pressure ulcers.
The total weight of the mattress is 16.5 kg.
This mattress is suitable for patients with a maximum weight of 230 kg. Above this weight, the preventive anti-decubitus effects may be restricted, and the mattress may be deformed.
The CliniCare 20 mattress is standardly available in sizes 200x86x14 cm and 200x90x14 cm. Special requirements for other dimensions can be dealt with on an individual basis.
The mattress cover is made of a flexible vapour-permeable material with a concealed zip.
The mattress core consists of a double layer of foam. The lower layer is polyurethane and the upper layer is thermoelastic. The sides of the mattress are made of stiffer polyurethane foam.