Your benefits at a glance

Records from beds can be directly exported to the hospital information system HIS via HL7 v2 standard, so hospital personnel do not have to import them to HIS manually. It helps to easily pair bed data with patient’s HIS data.

Our goal is help modernize the hospital’s infrastructure by supporting electronic record sharing.

LINIS SafetyPort helps to continuously track patients’ weight. Automatically records several care procedures such as using lateral tilt, Trendelenburg position, etc. Saves time of hospital personnel for administrative tasks and improves their workflow. Helps bioengineers and technicians make the logistics of beds operation more efficient and gives them an overview of beds location.

LINIS SafetyPort is HL7 V2 compliant. Compatibility with facility specific EMR, HIS, middleware or software may require additional programming, software, hardware or other elements.

Technical features

Bed safety position
Bed is in safety position (side rails up, lowest bed position, backrest at 30° or more, bed breaks on) 
Trendelenburg angle
Angles sensor provides information if the foot part of the bed is higher than the head part or opposite
Lateral angle position
Sensor provides information if a bed is tilted on the left or right side
Patient weight
Sensors provide information about patient weight 
Side rails position
Sensors provide information if side rails are up or down
Backrest 30°
Sensor provides information if backrest is set at 30°
Backrest angle
Sensor provides information of backrest angle
Brakes status
Sensor provides information if brakes are locked or not
Bed exit alarm  Sensor provides information when patient leaves the bed
Lowest position of bed
Sensor provides information if bed is in the lowest position or not
Bed exit monitoring
Sensors provide information if bed exit is activated or not and if zone bed exit is activated
Patient on bed
Sensor monitors patient presence on a bed
Location of bed
Sensor provides information about actual localisation of a bed (Parking site)

Using integrated bed sensors allows continuous monitoring of the key bed data and its transfer into the HIS.

SafetyPort Linet

The system is fully compatible with Multicare, Multicare LE and Eleganza 5 beds.

 Supported interface for the export of data to the hospital IS 
HL7 v2  
 Bed - server communication 
via Wifi/LAN
 IEEE 802.11 b/g/n (only 2,4 GHz), WPA/WPA2-PSK, WPA2 Enterprise PEAP-MsCHAPv2, static/dynamic IP address 
 10/100Base-TX (by IEEE 802.3u) 
 Minimum HW requirements 
 Dual-core CPU 3GHz, 4GB RAM, 100GB HDD 
 OS requirements
 Independent, but LINUX server is preferred. In case of Windows server use 2016, 2019 or later version.
 Web browser requirements
 IE11 and higher, Google Chrome

It is necessary to have a server connected to the Internet (for LINIS SafetyPort updates).

Pricing information

Prices of products are calculated individually. We always find customized solutions. For more information or an offer please fill out the form.

Send me more information