Air2Care 4,5,6,8

Air2Care 4,5,6,8 - The 2 cell alternating mattress family

Air2Care 4,5,6,8 is a range with an active alternating pressure mattress system for intensive, acute and long-term care.

Learn more

Air2Care 4,5,6,8

LINET introduces a range of Air2Care mattresses for hospitals and long-term care facilities with 2 -cell alternating system which provides effective support for the prevention of pressure injuries.
2-cell alternating system
4 Cycle Time Options
Fowler Boost
Individual cells removable

Main benefits of Air2Care 4, 5, 6, 8

Pressure injury prevention


INTERMITTENT PRESSURE REDUCTION
Due to the alternating 2-cell system, Air2Care reduces pressure and helps to minimise sustained pressure peaks to the patient’s body.
 
LOCALISED PRESSURE OFFLOADING
The individual cell construction uses self-sealing valves that allow the cells to be individually deflated.
 
MINIMIZED RISK OF BOTTOMING OUT WHILE SITTING
The Single Point Fowler Boost feature enables automatic detection of the raised backrest position.
Patient safety and comfort

Patient safety and control

The wide choice of cycle times allows caregivers to select the right balance of intermittent pressure reduction and patient comfort.

Cycle Time Options of 10/15/20/25 Minutes
Choice of appropriate cycle time based on the patient’s condition and individual preference.
infection control

Infection control

The cell construction makes it possible to completely remove the individual cells for cleaning and decontamination.
 
Self-sealing valves help maintain pressure, so the mattress stays inflated even if a cell is removed for cleaning or repair.
 
Individual cells can be removed so that the entire mattress may be easily cleaned.
 
The mattress cover is vapor permeable and water resistant. The zipper is covered to prevent the ingress of dirt or fluids. 
 
The mattress cover has a 360° zipper easy to remove the cover for cleaning.

Easy maintance

Easy maintenance

Individual cells are quick and easy to replace. 
Cells can be removed individually and replaced in case of damage. 

The removable cells with self-sealing valves enable quick and easy replacement of damaged cells without even having to switch off the system.
Easy patient transportation

Easy patient transportation

A static transport mode is available during transport or in any situation where the mattress is disconnected from the mains. 

Transport Mode can provide constant low pressure for 8 hours while disconnected from the power or System Control Unit (SCU).
User friendly control

User friendly control

Individual cells are quick and easy to replace. 
Cells can be removed individually and replaced in case of damage. 

The removable cells with self-sealing valves enable quick and easy replacement of damaged cells without even having to switch off the system.

More information about Air2Care 4,5,6,8

Tech Specs

Categories

Features  Air Decks Modes Transport mode Cycle time Fowler Boost
Mattress dimension  Length (cm) Width (cm) Depth (cm)
Additional parameters  Maximum patient weight (kg) Minimum patient weight (kg) Cover Zipper Handles

Air2Care 8

  Air+Air Alternate, Max, Constant Low Pressure Yes 10, 15, 20, 25 min Single point
  200 86/100 20
  180/250 40 Waterproof and Vapor Permeable, Stretch Cover 360° Yes

Air2Care 6

  Air+Air Alternate, Max, Constant Low Pressure Yes 10, 15, 20, 25 min Single point
  200/210 86/90 15
  160 40 Waterproof and Vapor Permeable, Stretch Cover 360° Yes

Air2Care 5

  Overlay Alternate, Max, Constant Low Pressure Yes 10, 15, 20, 25 min Single point
  200 86 12,5
  140 40 Waterproof and Vapor Permeable, Stretch Cover 360° Yes

Air2Care 4

  Overlay Seating Cushion Alternate, Max, Constant Low Pressure Yes 10, 15, 20 min -
  48 46 10
  130 40 Waterproof and Vapor Permeable, Stretch Cover 270° -

GET IN TOUCH AND LEARN MORE ABOUT AIR2CARE 4,5,6,8

Contact our customer advisor